Clearaudio CHAMPION BASIC Bedienungsanleitung PDF herunterladen (Seite 16)

Cham

Bedienungsanleitung

USER MANUAL

Seite/Page 16 © clearaudio electronic GmbH 2007

15. Now position the upper part of the platter

bearing and push it down. There should not

be any air left inside the bearing.

16. Place the platter carefully over the bearing.

Caution: Do not use too much pressure for

this step otherwise you will cause damage to

the platter or bearing.

17. Place the pulley on the motor spindle. The distance between

the pulley and the motor housing should be approx. 1mm.

Tighten the little screws inside the pulley with the aluminium

screwdriver provided.

18. Take the motor and place it in the indent of

the chassis. The switch should be on the

outside of the turntable and the space

between motor and chassis approx. 1cm.

(set up in chapter 4.).

1 2 ... 11 12 13 14 15 16 17 18 19

Keine Kommentare

Clearaudio CHAMPION BASIC Bedienungsanleitung Seite 16